OOAK Table Tennis Forum


A truly International Table Tennis Community for both Defensive and Offensive styles!
Live Table Tennis Videos Table Tennis News Live OOAK Forum Links About OOAK Table Tennis Forum OOAK Forum Memory
It is currently 22 Jan 2017, 07:08


Don't want to see any advertising? Become a member and login, and you'll never see an ad again!



All times are UTC + 9:30 hours




Post new topic Reply to topic  [ 435 posts ]  Go to page Previous  1 ... 24, 25, 26, 27, 28, 29  Next
Author Message
 Post subject: Re: Make your own blade
PostPosted: 08 Jun 2015, 18:19 
Offline
New Member

Joined: 17 Jan 2015, 16:20
Posts: 30
Has thanked: 0 time
Been thanked: 1 time
Ok so blade is done and tested .
I gave it to our trainer for test here at club.. and he was pleased from the amount of control and weight ratio. He like it a lot.
The blade is OFF+ and has a great feel (from my point of view is more vibrant (significantly more ) than all wood blades i have made so far) So i`m really happy to achieve this kind of blade .

So it is
0.4 mm Mahogany (originally it was .6 but i brushed it down to 0.4mm ) 0.2mm carbon 5 mm balsa 0.2mm carbon 0.4 mm Mahogany.
weight is 85g.

Finish coat is teak oil only one layer (not measurable weight difference) .

On the side is hard to see the carbon layer (photos taken with my cell phone) but it is there.
Image
Image

Robert


Top
 Profile  
 


Don't want to see this advertisement? Become a member and login, and you'll never see an ad again!

 Post subject: Re: Make your own blade
PostPosted: 06 Jul 2015, 01:23 
Offline
New Member

Joined: 17 Jan 2015, 16:20
Posts: 30
Has thanked: 0 time
Been thanked: 1 time
I found a interesting truth about the carbon blades.
It is common knowledge that carbon did not change shape in direct sunlight or heat.... But i forgot it and i let dry the bladesafter gluing the handles to the dirrect sunlight...... And i think you now what had happened. The top ply has just jump out from the carbon layer..... So two blades in trash...... Good knowledge for me.....
Robert


Top
 Profile  
 
 Post subject: Re: Make your own blade
PostPosted: 06 Jul 2015, 02:09 
Offline
Goes to 11
Goes to 11
User avatar

Joined: 13 Jan 2014, 20:27
Posts: 4624
Has thanked: 0 time
Been thanked: 464 times
Wow.. Never thought that would happen. What glue was used to attach the top plies to the carbon??

Iskandar


Top
 Profile  
 
 Post subject: Re: Make your own blade
PostPosted: 06 Jul 2015, 14:27 
Offline
New Member

Joined: 17 Jan 2015, 16:20
Posts: 30
Has thanked: 0 time
Been thanked: 1 time
i have used the CHS EPOXY 324.
But this is normal ... the wood is really sensitive to heat and can pretty quick change the shape (especially when is a thin ply of wood)... but carbon stay always the same shape ... so it is only a matter of time where the tension breaks the glue.


Top
 Profile  
 
 Post subject: Re: Make your own blade
PostPosted: 06 Jul 2015, 19:36 
Offline
Goes to 11
Goes to 11
User avatar

Joined: 13 Jan 2014, 20:27
Posts: 4624
Has thanked: 0 time
Been thanked: 464 times
Nevertheless it's not a common occurrence, given the huge number of carbon blades in use. I'd never heard of it happening before.

Did you allow the carbon layer to cure hard before adding the face plies? Sometimes getting glues to stick to already-cured epoxies isn't easy.

Iskandar


Top
 Profile  
 
 Post subject: Re: Make your own blade
PostPosted: 07 Jul 2015, 05:47 
Offline
New Member

Joined: 17 Jan 2015, 16:20
Posts: 30
Has thanked: 0 time
Been thanked: 1 time
I glued all 5 ply together and it was one week left for dring. ....but is was really hot day....but who is placing his blade onto direct sunlight when outside is 36 degres celsius and inside of the room it is cool. It was for about 20 min.


Top
 Profile  
 
 Post subject: Re: Make your own blade
PostPosted: 03 Aug 2015, 13:06 
Offline
New Member

Joined: 04 Dec 2014, 05:53
Posts: 20
Has thanked: 0 time
Been thanked: 3 times
Been feeling like this might be fun, and so I stopped by a wood supply yesterday. Bought a couple pieces of wood: Red cedar (apparently alright for single ply blades), Limba (Which unfortunately cracked, luckily I only bought 1 foot), and Bubinga (Not a common TT wood, but it had a very nice tone when knocked). A bit less than a solid start, as I found that I'll need a band saw and a planer to get these down to a usable size (Which means going to a woodworking makespace or something). I'll have to check other places to see if they have single plies closer to 1/4". I started working on a blank from the red cedar, but messed up and made it a bit too thin near the top, so it's going to be a really janky 3/4" single ply.
One thing I noticed was that the veneers they had stocked mostly had paper backs. Would this mess with the vibration and make the veneer worthless for blades? Or would it be too little to matter?


Top
 Profile  
 
 Post subject: Re: Make your own blade
PostPosted: 18 Aug 2015, 23:22 
Offline
New Member

Joined: 17 Jan 2015, 16:20
Posts: 30
Has thanked: 0 time
Been thanked: 1 time
I do not get most of your post. But the wood choice looks fine.... Have fun and do not be afraid to ask... I will try to help if it will be possible from my side.


Top
 Profile  
 
 Post subject: Re: Make your own blade
PostPosted: 19 Aug 2015, 00:54 
Offline
Goes to 11
Goes to 11
User avatar

Joined: 13 Jan 2014, 20:27
Posts: 4624
Has thanked: 0 time
Been thanked: 464 times
The paper backs are supposed to be removed, I think - or you can remove them after gluing the faces to the core.

Real simple blades - go to a model airplane store and buy birch ply. It's available all the way down to 1/64" (0.4mm) thick, and that's THREE plies of wood. They'll also sell balsa in various thicknesses.

Iskandar


Top
 Profile  
 
 Post subject: Re: Make your own blade
PostPosted: 26 Aug 2015, 14:42 
Offline
New Member

Joined: 04 Dec 2014, 05:53
Posts: 20
Has thanked: 0 time
Been thanked: 3 times
iskandar taib wrote:
The paper backs are supposed to be removed, I think - or you can remove them after gluing the faces to the core.

Nope, the backing is definitely permanently attached. The purpose is to provide a more glue-friendly surface so the attachment will be easier and less likely to pop up.
iskandar taib wrote:
Real simple blades - go to a model airplane store and buy birch ply. It's available all the way down to 1/64" (0.4mm) thick, and that's THREE plies of wood. They'll also sell balsa in various thicknesses.

I'll check that out!


Top
 Profile  
 
 Post subject: Re: Make your own blade
PostPosted: 26 Oct 2015, 13:22 
Offline
New Member

Joined: 26 Oct 2015, 13:14
Posts: 5
Has thanked: 0 time
Been thanked: 0 time
Well I just started playing about a month ago and found this thread and was inspired.

So after several failed attempts I finally produced a blade now I gotta figure out this rubbers nonsense. Learned a few tricks/ideas in the process and v2 is already under construction.

anyway:
Image
Image


Top
 Profile  
 
 Post subject: Re: Make your own blade
PostPosted: 29 Oct 2015, 00:59 
Offline
New Member

Joined: 17 Jan 2015, 16:20
Posts: 30
Has thanked: 0 time
Been thanked: 1 time
Nice.. And congrats .....what is the composition ?


Top
 Profile  
 
 Post subject: Re: Make your own blade
PostPosted: 29 Oct 2015, 01:26 
Offline
Goes to 11
Goes to 11
User avatar

Joined: 13 Jan 2014, 20:27
Posts: 4624
Has thanked: 0 time
Been thanked: 464 times
And what's with the wires? :lol: The shape is reminiscent of the LKT Toxic, I think..

Iskandar


Top
 Profile  
 
 Post subject: Re: Make your own blade
PostPosted: 30 Oct 2015, 06:25 
Offline
New Member

Joined: 26 Oct 2015, 13:14
Posts: 5
Has thanked: 0 time
Been thanked: 0 time
bobpuls wrote:
Nice.. And congrats .....what is the composition ?

Thanks!
its mahogany mahogany balsa.
iskandar taib wrote:
And what's with the wires? :lol: The shape is reminiscent of the LKT Toxic, I think..

Iskandar


lol wires are so the poly can dry.


Top
 Profile  
 
 Post subject: Re: Make your own blade
PostPosted: 01 Nov 2015, 06:26 
Offline
New Member

Joined: 26 Oct 2015, 13:14
Posts: 5
Has thanked: 0 time
Been thanked: 0 time
So I wanted to take what I learned from the first blade and try a second. Also I wanted to build a more defensive blade.

heres the newest version:
composition:
-bubinga
- 3/32" balsa
-walnut
-3/16" balsa core
-walnut
-3/32" balsa
-bubinga

-ebony handles

production upgrades:
-router template blade shape
-router template handles

Image
Image
Image
Image
Image
Image
Image
Image


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 435 posts ]  Go to page Previous  1 ... 24, 25, 26, 27, 28, 29  Next




All times are UTC + 9:30 hours


Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Copyright 2012 OOAK Table Tennis Forum. The information on this site cannot be reused without written permission.

Powered by phpBB® Forum Software © phpBB Group




Don't forget to 'LIKE' our forum on Facebook if you enjoy the content: