OOAK Table Tennis Forum https://ooakforum.com/ |
|
The properties of different types of wood https://ooakforum.com/viewtopic.php?f=43&t=12687 |
Page 7 of 7 |
Author: | iskandar taib [ 09 Sep 2016, 16:48 ] |
Post subject: | Re: The properties of different types of wood |
Try a carbon fiber guitar? Or balsa violin? http://www.nytimes.com/2006/11/29/healt ... 11373.html Iskandar |
Author: | kim biceps [ 09 Sep 2016, 17:12 ] |
Post subject: | Re: The properties of different types of wood |
Not yet . Haha even as a guitar player we tend to be obsessed on what kinda of woods man, but I remembered when buying my first real guitar , ibanez prestige was made with basswood which is one of the lower line of wood. But when u play with effects and stuffs those stuff don't matter ( to me at least) Aesthetic wise, ppl value ebony fretboard and mahogany bodies. There's occasional exotic woods with pretty grains like zebrawood. Time to get my knowledge upgraded on wooda for table tennis then! |
Author: | Robot Blocker [ 20 Dec 2017, 08:44 ] |
Post subject: | Re: The properties of different types of wood |
Poplar, I believe also known as Pappel is the sole wood of the Joola Tony Hold White Spot, also known as the JTHWS. Great thread TT, and others, most informative! Thank you. |
Author: | tomeh [ 29 Jan 2020, 07:08 ] |
Post subject: | Re: The properties of different types of wood |
Only with the fact that wood 1 combined with the other gives completely different results in the same way as it plays with different facings. For example, there is no wood that will behave identically in combination - soft wood always light - heavy always hard, flexibility again another type not only depends on the hardness |
Author: | iskandar taib [ 14 Oct 2020, 02:53 ] |
Post subject: | Re: The properties of different types of wood |
Robot Blocker wrote: Poplar, I believe also known as Pappel is the sole wood of the Joola Tony Hold White Spot, also known as the JTHWS. Visit a model airplane store that sells wood - you'll find something called "Lite Ply". It's poplar plywood. Usually available in 1/8 inch (nominally 3mm) 3 ply or 1/4 inch (nominally 6mm) 5 ply. Most of it is warped, but you could stick two layers of the 3mm 3 ply together (clamped between flat pieces of fiberboard or wood as it dries) and come up with a flat sheet. Might be worth a try. The other kind of ply they often sell is birch aircraft plywood, comes as thin as three ply 0.4mm. Makes nice blades, on both sides of a balsa core. It's relatively dense - Bob Brickell sold (or used to) a ten ply 1/4" thick birch blade, made by laminating together two layers of 5 ply 1/8" birch. I remember it had a relatively small head. He was also famous for his 7 ply birch-balsa-birch blades (two layers of thin 3 ply birch on a balsa core). Iskandar |
Page 7 of 7 | All times are UTC + 9:30 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |