OOAK Table Tennis Forum

A truly International Table Tennis Community for both Defensive and Offensive styles!
OOAK Forum Links About OOAK Table Tennis Forum OOAK Forum Memory
It is currently 24 Mar 2019, 05:53

Don't want to see any advertising? Become a member and login, and you'll never see an ad again!

All times are UTC + 9:30 hours

Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: 22 Feb 2018, 19:44 
Manufacturer: RE-IMPACT

Joined: 01 Dec 2011, 06:01
Posts: 190
Location: Lembruch Dumber lake, Diepholz, Lower Saxony, Germany
Has thanked: 0 time
Been thanked: 21 times
At Re-Impact the blade is considered to be as important as the rubbers, for blades themselves can (when certain technical requirements have been fulfilled) have a high potential for producing spin.

At that, it is always important to keep the combination of blade and rubbers as lightweight as possible. Most Re-Impact blades may be thicker than normal blades (among other things because this helps to enlarge the sweet-spot) but thicker blades should as a rule be combined with thinner rubbers – under certain conditions even with rubbers that have as thin a sponge as possible, which minimizes the overall weight.
Playing with rubbers which have too thick a sponge, and which are technically equivalent to the blade’s potential to accelerate the ball (e.g. factory-tuned rubbers), may result in a negative interaction between blade and rubber, even to the extent that the actions of blade and rubber neutralize each other.

The new plastic ball has a higher bounce than the celluloid ball, which allows the opponent to return the ball more often and tends to make rallies longer. As a result, the temperature of a plastic ball increases during the rally to the extent that the ball is charged with static electricity. Statically charged balls are (electrically) attracted to rubbers with high friction, that is they tend to cling to them, thus dramatically decreasing their spin potential. The same phenomenon results in less reversal with long pimpled rubbers.

The plastic ball was introduced because it would prevent speed-gluing even if officials failed to notice it, as well as playing with long pimpled rubbers that were treated to make them frictionless, and the practice of some players to make the ball spin with their fingers unnoticed when they serve. These prohibited practices are now no longer feasible, but it has come at the expense of all players, for the ball limits the playing possibilities for everyone.

Whoever wants to increase the playing possibilities and regain the pleasure in playing with less limits does well to choose a Re-Impact blade. For my blades have an asymmetric shape, which is designed to decrease the stress in arm and shoulder. The principle involved is simple and clear – an asymmetric blade, with one side longer than the other, will automatically be closed when a stroke is performed, and this diminishes air resistance. This decreases stress in arm and shoulder so much that a player will be able to move the blade with significantly more ease and speed, thus gaining time for his returns, as well as a finer touch. Closing the blade will also influence the trajectory of the ball, which will increase the effect of topspin balls as they will dip much faster. You will have this benefit when you hold the handle of the blade so, that the notches in the handle touch the palm of your hand, not the fingers.

If a player reverses the blade (so that now the notches will touch the fingers, not the palm of the hand) the asymmetric shape will be reversed and automatically the hand will grip the handle deeper, stiffening the blade as a whole. As a result the ball’s trajectory will now be higher and more linear, and the speed will tend to increase.

Depending on the way it is held, then, a Re-Impact blade will display one of two different characters.

Opposite to the direction of the asymmetric blade’s head there is a built-in diagonal in my blades. The wood plies are glued diagonally together. This diagonal runs from the upper right part to the lower left part of the head when you hold the handle so that the notches touch the palm of your hand. It runs in the opposite direction, upper left to lower right part of the blade’s head, when you reverse the blade. As our hands are asymmetrical, the ball will always come in along the diagonal; therefore, the built-in diagonal ensures ideal contact with the ball. The design also helps (the thicker the blade, the more) to create sound waves and sound patterns that reveal audibly the behaviour of the ball – you will also feel, by percussion, how the ball bounces and spins. Feeling and hearing come together in recognizable patterns, which inform the player, increasing his touch and allowing him to play with more feeling and more risk. This way, thicker blades provide finer touch. But they are also softer, so balls can dig in deeper. This allows, depending on your technical abilities, to have better control over the ball and its spin.

Thus, by reversing the blade, a player has in one blade two different playing characters; and, due to the diagonal, the forehand surface and backhand surface will be different as well for the two characters. As a result, when a right-handed player plays with the backhand, he will play like a left-handed player using the forehand, and vice versa. For the diagonal in the blade changes direction when the blade is reversed.
In the normal or 1st position (notches touching the palm of the hand) and the diagonal running from top right to bottom left, contact with the ball produces soundwaves running against the direction of the wood’s fibres (thread); this will dampen the speed and increase spin. Reversing the blade to the 2nd position (notches touching the fingers) the opposite will happen, so speed will increase and spin decrease.

Playing a Re-Impact blade one should always use the free arm as balancing arm. This enables to build tension in the back and diminish tension in the playing arm. The asymetrical design makes it desirable to move the arm straight forward when performing forehand strokes; that is, as the playing arm will automatically close the blade, one should not try to do this extra, since this is not required. Pulling the ball up or pushing it down by express movement of the arm is made redundant by the design of the blade. Pushing it down will even lead to netting the ball, as it will dip faster anyway.

Most of the Re-Impact blades are active blades, which will only produce maximum spin when the ball is contacted in its highest point or when it is coming up. This is due to the very thin outer plies, which allow the blade to react so fast on contact with the ball that a long arm movement is counterproductive. If a player prefers to loop balls that are past the highest point and descend, he will need a classic design, that is one with thicker outer plies that spread the impact of the ball over the surface of the blade. There are, however, a few models which can do both, for instance the old cult blade Krenzer Konterspin 5 or the new Turbo and Preference. Turbo and Preference are Re-Impact=2 novelties, allowing ball-contact for looping at any phase of the balls trajectory, be it descending or ascending. They, and all Dream-combination blades, are also designed to function optimally with the Asian 44mm hard bat ball.


PostPosted: 22 Feb 2018, 20:34 
Hurricane Lover
Hurricane Lover
User avatar

Joined: 09 Mar 2008, 19:19
Posts: 2698
Location: Indonesia
Has thanked: 134 times
Been thanked: 185 times
Blade: DHS Long 2
FH: Dianchi D
BH: Yinhe Pluto
Sounds interesting! Photos would help a lot as well.

instagram: rokphishtt

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC + 9:30 hours

Who is online

Users browsing this forum: No registered users and 13 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Copyright 2018 OOAK Table Tennis Forum. The information on this site cannot be reused without written permission.

Powered by phpBB® Forum Software © phpBB Group

Don't forget to 'LIKE' our forum on Facebook if you enjoy the content: