I guess I'll just have to try it.
| OOAK Table Tennis Forum https://ooakforum.com/ |
|
| Nittaku Fastarc series - 1.4mm? https://ooakforum.com/viewtopic.php?f=44&t=31651 |
Page 1 of 1 |
| Author: | Dusty054 [ 06 Aug 2017, 19:42 ] |
| Post subject: | Nittaku Fastarc series - 1.4mm? |
These are fast highly offensive rubbers and I notice they are available in 1.4mm. What style of play would this thickness support? Would it retain much offensive capacity in 1.4mm? |
|
| Author: | Dusty054 [ 09 Aug 2017, 11:59 ] |
| Post subject: | Re: Nittaku Fastarc series - 1.4mm? |
I guess I'll just have to try it.
|
|
| Author: | iskandar taib [ 09 Aug 2017, 12:53 ] |
| Post subject: | Re: Nittaku Fastarc series - 1.4mm? |
Close to the table chop-blocking and flat hitting? Iskandar |
|
| Author: | Dusty054 [ 09 Aug 2017, 13:45 ] |
| Post subject: | Re: Nittaku Fastarc series - 1.4mm? |
Probably. I was wondering if in 1.4 it would have the stability and control required for reliable chopping whilst retaining enough power for close to mid distance looping & drives. I changed from Mark V to Marder 11 which has lots of grip/spin and is better for chopping but lacks a little fire power for fast topspins. Maybe I should just try Marder IV. |
|
| Author: | iskandar taib [ 09 Aug 2017, 15:44 ] |
| Post subject: | Re: Nittaku Fastarc series - 1.4mm? |
Close maybe but not middle. It'd probably bottom out. Iskandar |
|
| Author: | BeGo [ 09 Aug 2017, 23:59 ] |
| Post subject: | Re: Nittaku Fastarc series - 1.4mm? |
Dusty054 wrote: Probably. I was wondering if in 1.4 it would have the stability and control required for reliable chopping whilst retaining enough power for close to mid distance looping & drives. It would be the opposite, I changed from Mark V to Marder 11 which has lots of grip/spin and is better for chopping but lacks a little fire power for fast topspins. Maybe I should just try Marder IV. The ability to create spin and vulnerability to spin became limited, and Your flat hit will became less dampened by the rubber, faster but harder to push down with top spin, which, Actually make it easier to hit harder from longer distance, because You would not over loop the ball, with better control for blocking. Your short game would suffer though. Sent from my i5E using Tapatalk |
|
| Author: | Dusty054 [ 10 Aug 2017, 14:57 ] |
| Post subject: | Re: Nittaku Fastarc series - 1.4mm? |
It's difficult to find offensive rubbers that are also great for chopping, but I think that I am narrowing the field. |
|
| Author: | dazzler [ 10 Aug 2017, 15:35 ] |
| Post subject: | Re: Nittaku Fastarc series - 1.4mm? |
Dusty054 wrote: I changed from Mark V to Marder 11 which has lots of grip/spin and is better for chopping but lacks a little fire power for fast topspins. Maybe I should just try Marder IV. I just got some Marder 11 1.5 black,bouncing the ball on it 3 or four bounces and the ball dies! I like the look of this one ,even though the sponge is fairly soft the sponge /topsheet combination feels dense enough for close to mid looping without bottoming out,I will be treating it with Falco long booster to get the required speed and along with the high grip I have high hopes for this one ,just wondering if it`s good enough to take the booster! |
|
| Author: | Dusty054 [ 10 Aug 2017, 15:46 ] |
| Post subject: | Re: Nittaku Fastarc series - 1.4mm? |
dazzler wrote: Dusty054 wrote: I changed from Mark V to Marder 11 which has lots of grip/spin and is better for chopping but lacks a little fire power for fast topspins. Maybe I should just try Marder IV. I just got some Marder 11 1.5 black,bouncing the ball on it 3 or four bounces and the ball dies! I like the look of this one ,even though the sponge is fairly soft the sponge /topsheet combination feels dense enough for close to mid looping without bottoming out,I will be treating it with Falco long booster to get the required speed and along with the high grip I have high hopes for this one ,just wondering if it`s good enough to take the booster! I have it in 1.8. Haven't tried boosting. I can loop with it, even from mid distance, but there's no catapult so it requires some effort to do it repetitively. |
|
| Author: | iskandar taib [ 10 Aug 2017, 19:55 ] |
| Post subject: | Re: Nittaku Fastarc series - 1.4mm? |
dazzler wrote: I just got some Marder 11 1.5 black,bouncing the ball on it 3 or four bounces and the ball dies! Try this with 2.1mm Hurricane 3..  Very, very eye opening. Iskandar |
|
| Author: | dazzler [ 10 Aug 2017, 20:53 ] |
| Post subject: | Re: Nittaku Fastarc series - 1.4mm? |
I'm too lazy after Tenergy, I tried H3 it required more effort for less reward even boosted,heaviest underspin serves and pushes I've ever produced though.The Marder11 is more elastic |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|