OOAK Table Tennis Forum https://ooakforum.com/ |
|
Nittaku Acoustic Carbon Inner vs Innerforce ALC vs 301 https://ooakforum.com/viewtopic.php?f=43&t=37639 |
Page 1 of 2 |
Author: | JimmyJammy [ 13 Feb 2021, 06:40 ] |
Post subject: | Nittaku Acoustic Carbon Inner vs Innerforce ALC vs 301 |
For blades, I'm deciding between: Nittaku Acoustic Carbon Inner Butterfly Innerforce Layer ALC DHS Hurricane 301 Also, I'll need to figure out which rubbers to get. Any advice appreciated! Currently I play with the 5 ply OSP Virtuoso OFF-. Great feeling, but I'd like more speed. |
Author: | ootbs [ 13 Feb 2021, 15:36 ] |
Post subject: | Re: Nittaku Acoustic Carbon Inner vs Innerforce ALC vs 301 |
If you taken into consideration Price:Performance, then I'd say, Hurricane 301, hands-down... Infact, even without factoring-in the price, I feel this blade out-performs, some of the other ALC blades that'd cost 2-3 times more.. My fellow club members have the Long 5 (With t05), and 301 (Rozena + Fastarc) , so I've tried both, and prefer the 301. I find it a lot easier to control, than the Long 5.. It also pairs well with most rubber types.. |
Author: | JimmyJammy [ 13 Feb 2021, 16:24 ] |
Post subject: | Re: Nittaku Acoustic Carbon Inner vs Innerforce ALC vs 301 |
I certainly like the price of the Hurricane 301!! |
Author: | Alas [ 14 Feb 2021, 02:44 ] |
Post subject: | Re: Nittaku Acoustic Carbon Inner vs Innerforce ALC vs 301 |
My vote goes to DHS Hurricane 301 + coaching. Sent from my iPhone using Tapatalk |
Author: | JimmyJammy [ 14 Feb 2021, 12:11 ] |
Post subject: | Re: Nittaku Acoustic Carbon Inner vs Innerforce ALC vs 301 |
Looking forward to coaching after everyone in my neighborhood has the Covid vaccine! For now, I play with a group of 6 people. |
Author: | JimmyJammy [ 14 Feb 2021, 12:11 ] |
Post subject: | Re: Nittaku Acoustic Carbon Inner vs Innerforce ALC vs 301 |
Looking forward to coaching after everyone in my neighborhood has the Covid vaccine! For now, I play with a group of 6 people in a well-ventilated gym. |
Author: | JimmyJammy [ 14 Feb 2021, 12:12 ] |
Post subject: | Re: Nittaku Acoustic Carbon Inner vs Innerforce ALC vs 301 |
I'm now thinking Hurricane 301 with Fastarc G-1 FH and Rakza 7 Soft on BH What do you think? |
Author: | Alas [ 14 Feb 2021, 17:40 ] |
Post subject: | Re: Nittaku Acoustic Carbon Inner vs Innerforce ALC vs 301 |
JimmyJammy wrote: I'm now thinking Hurricane 301 with Fastarc G-1 FH and Rakza 7 Soft on BH What do you think? If you’re used to tensors, would say that’s going to be a fine set up! Stick to it and have tons of fun I’m excited for you. |
Author: | merlin el mago [ 14 Feb 2021, 20:32 ] |
Post subject: | Re: Nittaku Acoustic Carbon Inner vs Innerforce ALC vs 301 |
Fastarc G-1 is not tensor! |
Author: | Alas [ 15 Feb 2021, 02:04 ] |
Post subject: | Re: Nittaku Acoustic Carbon Inner vs Innerforce ALC vs 301 |
merlin el mago wrote: Fastarc G-1 is not tensor! Thanks for your input. Sorry if I’ve offended you by generalizing... but it’s own description says that it is “ A power topsheet with a built-in tension power sponge...” So, how would you classify it? It’s definitely not a “Chinese style” rubber, right? |
Author: | merlin el mago [ 15 Feb 2021, 03:05 ] |
Post subject: | Re: Nittaku Acoustic Carbon Inner vs Innerforce ALC vs 301 |
Don't have catapult effect. Tensor technology is a pre-tensioned rubber topsheet nothing about sponge..... |
Author: | JimmyJammy [ 15 Feb 2021, 04:29 ] |
Post subject: | Re: Nittaku Acoustic Carbon Inner vs Innerforce ALC vs 301 |
I'd like a rubber that isn't *too* fast. Looking at Rakza 7 Fastarc G-1 (I currently use this on a 5ply blade and like it) Xiom Vega Europe Donic Acuda P2 (or M2?) |
Author: | Alas [ 15 Feb 2021, 04:44 ] |
Post subject: | Re: Nittaku Acoustic Carbon Inner vs Innerforce ALC vs 301 |
merlin el mago wrote: Don't have catapult effect. Tensor technology is a pre-tensioned rubber topsheet nothing about sponge..... It was my understanding that G1 is also produced by ESN in Germany. This is all besides the point of this thread. |
Author: | Alas [ 15 Feb 2021, 04:45 ] |
Post subject: | Re: Nittaku Acoustic Carbon Inner vs Innerforce ALC vs 301 |
JimmyJammy wrote: I'd like a rubber that isn't *too* fast. Looking at Rakza 7 Fastarc G-1 (I currently use this on a 5ply blade and like it) Xiom Vega Europe Donic Acuda P2 (or M2?) I’m with you in wanting something that isn’t too fast. G1 fits that bill in my opinion. |
Author: | JimmyJammy [ 15 Feb 2021, 07:41 ] |
Post subject: | Re: Nittaku Acoustic Carbon Inner vs Innerforce ALC vs 301 |
I've been using G-1 on my FH on an OSP Virtuoso Off-. love it. |
Page 1 of 2 | All times are UTC + 9:30 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |