OOAK Table Tennis Forum https://ooakforum.com/ |
|
Blade Composition List https://ooakforum.com/viewtopic.php?f=43&t=7194 |
Page 8 of 14 |
Author: | ilikepie [ 03 May 2011, 11:34 ] |
Post subject: | Re: Blade's Composition List |
the joo se hyuk blade looks like this: planchonello 0.8 poplar or some porous wood 0.6 kiri? poplar planchonello the A. grubba has outer and secondary layers of yellow anigre. not sure about the core. the viscaria composition is koto-ALC-balsa-ALC-koto, i believe. |
Author: | pingpong [ 05 May 2011, 01:26 ] |
Post subject: | Re: Blade's Composition List |
Any one knows the Yin-He Galaxy T-4 composition???? Thank you. P.S: Very interesting Forum |
Author: | Slick [ 05 Jun 2011, 20:16 ] |
Post subject: | Re: Blade's Composition List |
Historical material: Does anyone know about the woods the Nittaku Combi-Wood Attack was made of? I know the fh side had a rosewood veneer as second layer, and the bh probably limba. However, which type of wood was the core worked up with? And which ones were the cover veneers? |
Author: | drusen [ 09 Jun 2011, 14:27 ] |
Post subject: | Re: Blade's Composition List |
Can someone help me with the composition of Darker blades? I'm looking for one suitable blade among Darker ones therefore I need to know as much information as possible. thanks in advance/ |
Author: | Slick [ 19 Jun 2011, 02:07 ] |
Post subject: | Re: Blade's Composition List |
I think asymmetric blades are of special interest (for "materialists") and I found data of this one: Nimatsu Tsunami Combi Attack: 0,6mm limba - 2,0mm balsa - 6,0mm balsa - 2,0mm balsa - 0,6mm ayous I´m just wondering about ayous on the (suggested) bh side. This wood is normally used as core wood not for outer veneers. Does anyone have an idea how this may work out? About pliability? Is it true ayous is identical to abachi? |
Author: | haggisv [ 19 Jun 2011, 08:51 ] |
Post subject: | Re: Blade's Composition List |
I've seen a 1-ply Ayous blade, and it felt quite bouncy and lively, and the feel was fairly soft. It felt a little like hinoki, although it's heavier. |
Author: | QuickDraw [ 19 Jun 2011, 10:09 ] |
Post subject: | Re: Blade's Composition List |
drusen wrote: Can someone help me with the composition of Darker blades? I'm looking for one suitable blade among Darker ones therefore I need to know as much information as possible. thanks in advance/ Most are all hinoki. There are a few hinoki + carbon. Dunno if they make any others. haggisv wrote: I've seen a 1-ply Ayous blade, and it felt quite bouncy and lively, and the feel was fairly soft. It felt a little like hinoki, although it's heavier. That's pretty accurate. It has less vibration that hinoki, it's noticeably faster with fewer gears, semi-soft, pretty stiff, and fairly heavy. But as a thin veneer, it would probably be largely indistinguishable from most other offensive wood veneers. |
Author: | aroonkl [ 11 Sep 2011, 20:12 ] |
Post subject: | Re: Blade's Composition List |
Donic BURN OFF construction? |
Author: | rdj735 [ 12 Sep 2011, 00:38 ] |
Post subject: | Re: Blade's Composition List |
Donic Burn All+: mahogany - awan - kiri - awan - mahogany Donic Burn Off-: mahogany - awan - kiri - awan - mahogany Donic Burn Off: mahogany - awan - kiri - awan - mahogany |
Author: | aroonkl [ 12 Sep 2011, 08:30 ] |
Post subject: | Re: Blade's Composition List |
rdj735 wrote: Donic Burn All+: mahogany - awan - kiri - awan - mahogany Donic Burn Off-: mahogany - awan - kiri - awan - mahogany Donic Burn Off: mahogany - awan - kiri - awan - mahogany THANKS. |
Author: | rokphish2 [ 12 Sep 2011, 16:12 ] |
Post subject: | Re: Blade's Composition List |
list updated |
Author: | haggisv [ 12 Sep 2011, 17:51 ] |
Post subject: | Re: Blade's Composition List |
rokphish2 wrote: list updated Thanks Rok! |
Author: | rokphish2 [ 13 Sep 2011, 02:52 ] |
Post subject: | Re: Blade's Composition List |
haggisv wrote: rokphish2 wrote: list updated Thanks Rok! you're welcome... took me over a year... should be faster now... |
Author: | dingyibvs [ 15 Oct 2011, 08:02 ] |
Post subject: | Re: Blade's Composition List |
I just noticed that the composition of the TBS and the Viscaria are not what I've heard. I think they both have Ayous-Kiri-Ayous as the inner plies, instead of Limba-Kiri-Limba and just Balsa for the TBS and the Viscaria respectively. Also, the old Taksim had the same composition except with Ayous top ply I believe. |
Author: | TheRobot99 [ 20 Oct 2011, 00:18 ] |
Post subject: | Re: Blade's Composition List |
JOOLA Flame Fast: Hinoki (0.8mm), Awan (1.0mm), Kiri (3.2mm), Awan (1.0 mm), Hinoki (0.8 mm) JOOLA Flame Low: Limba (1.0mm), Black Cloth, Kiri (4.0mm), Black Cloth, Limba (1.0 mm) JOOLA Flame Medium: Fineline (0.6mm), Awan (1.0mm), Kiri (3.2mm), Awan (1.0 mm), Fineline (0.6 mm) JOOLA Flame Extreme: Limba (0.8mm), Awan (1.0mm), Kiri (3.2mm), Awan (1.0 mm), Limba (0.8 mm) JOOLA Wing Passion Fast: Fineline, Oregon, Kiri, Oregon, Fineline JOOLA Wing Passion Extreme: Fineline, CS-Carbon, Kiri, CS-Carbon, Fineline All information from Megaspin.net. Thickness were given. |
Page 8 of 14 | All times are UTC + 9:30 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |