| OOAK Table Tennis Forum https://ooakforum.com/ |
|
| Amicus Advanced Trajectory problem https://ooakforum.com/viewtopic.php?f=67&t=38878 |
Page 1 of 1 |
| Author: | Shanghai [ 15 Jan 2022, 03:12 ] |
| Post subject: | Amicus Advanced Trajectory problem |
Hello! I want to ask help in resolving my problem with Amicus Advanced When I turn on the robot and setup different balls in the drill with different trajectories it all goes fine while I check every ball individually, but when I start the drill after couple of balls the trajectory became too high. And after that any ball which I try to setup goes higher then before. The little pin that pushes deflector get his higher position while on the control panel I have middle trajectory setup. And after that I cant setup any serve ball, because trajectory all too high and cant use any drill I saved in the memory because trajectory is messed. Please watch my video and sorry for my English. Hope for some advises! https://youtu.be/sMVE1Ko49Xo |
|
| Author: | Shanghai [ 31 Jan 2022, 03:28 ] |
| Post subject: | Re: Amicus Advanced Trajectory problem |
So, I figured out that stepper motor which control height is broken. Can someone tell what model of stepper motor amicus has? Both of mine have no any labels. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|