| OOAK Table Tennis Forum https://ooakforum.com/ |
|
| elmer's glue? https://ooakforum.com/viewtopic.php?f=9&t=23826 |
Page 1 of 2 |
| Author: | jasontron [ 25 Sep 2013, 06:27 ] |
| Post subject: | elmer's glue? |
so I recently heard an older gentleman talk about changing rubbers, and he says he always just uses elmer's school glue. is this a common thing to do, or has anyone heard of this before? he's a great player, been playing since the '70s, so it seems like there must be something to it. |
|
| Author: | hookshot [ 25 Sep 2013, 09:31 ] |
| Post subject: | Re: elmer's glue? |
Elmers rubber cement is a common glue for table tennis. It holds well and lets you remove the rubber when you want to change it. It is technically outlawed, (has VOCS) but they go away in a day or two so many people still use it. Good glue for a low price. It is used like contact cement, (DO NOT) use contact cement. Apply to both surfaces, sponge and the blade, let dry and assemble. Line up the rubber by the handle and roll it towards the end of the bat. Then trim with knife or sizzors. 
|
|
| Author: | abdulmuhsee [ 25 Sep 2013, 12:09 ] |
| Post subject: | Re: elmer's glue? |
He's talking about Elmer's school glue, as in the white stuff, not the rubber cement; the normal white glue does not have VOCs. I use it for all of my paddles, and it worked with normal sponge rubber as well. Just cover the edges of the blade, make a layer as thin as you can, then roll out any extra glue and bubbles. Should work fine, and if you want to ever change rubbers sometime down the road, it will always come off with a damp cloth. It may not be the perfect choice if your blade is not sealed, since some of the other glues have a sheet that you can rub/peel off. Elmer's white glue needs to be moistened to wash off as far as I know, but it works well for me, and for your friend it seems. IMO, it's pretty forgiving to apply since you can roll everything out to perfection as it dries if you make mistakes. |
|
| Author: | jasontron [ 25 Sep 2013, 12:54 ] |
| Post subject: | Re: elmer's glue? |
yup, school glue is what he said. is there a reason more people don't do this? seems pretty convenient and like cleanup wouldn't be too bad when removing old rubber... |
|
| Author: | abdulmuhsee [ 25 Sep 2013, 21:59 ] |
| Post subject: | Re: elmer's glue? |
jasontron wrote: yup, school glue is what he said. is there a reason more people don't do this? seems pretty convenient and like cleanup wouldn't be too bad when removing old rubber... Probably because it isn't known as a 'table tennis glue' or sold on table tennis sites, and perhaps many think they are getting some sort of advantage by using a different kind of glue. Using water in the cleanup process might also be a turnoff to some if their blade is unsealed, but I think it's easier than trying to rub, scrape, and peel your glue off. So yeah, if you're so inclined, give it a try! |
|
| Author: | tommyngo [ 29 Jan 2019, 03:36 ] |
| Post subject: | Re: elmer's glue? |
I tried Elmer's clear school glue on 4 different sealed blades and so far the rubbers stick well after 3 weeks playing . I do not know if they are still o.K. in the long term ? 
|
|
| Author: | iskandar taib [ 29 Jan 2019, 11:14 ] |
| Post subject: | Re: elmer's glue? |
Be careful guys... In the US, when they say "Elmer's Glue", they mean this specifically (everything else needs further elaboration):  This is WOOD GLUE. Though it's more often used for paper and cardboard these days, since it's been superseded by this stuff:  Don't use either of these, they'll either never dry, or you'll never get the rubber off again. The School Glue supposedly works, according to some reports, but I'm not going to try it. I use this:  This is time tested, and has been used to assemble table tennis bats for generations. Goes on clean, comes off clean, a lot easier to use than the new water based cements, and a lot faster to use. Iskandar |
|
| Author: | tommyngo [ 29 Jan 2019, 13:29 ] |
| Post subject: | Re: elmer's glue? |
[quote="iskandar taib"] The clear school glue is better than the white school glue ( i.e no whitish traces around the rubber edge ) . As this glue is water-based , the blade should be sealed with water-proof urethane ( or similar products ) .You can use a piece of rectangular , thin plastic sheet ( i.e. a discarded credit card ...) to spread out the glue on the rubbers & the sealed blade . |
|
| Author: | Japsican [ 29 Jan 2019, 22:53 ] |
| Post subject: | Re: elmer's glue? |
I think more people don't use the white school glue, not because it isn't effective at holding the rubber to the paddle, but because it's hard to remove from the sponge of the rubber (i theorize, no direct experience). White glue really bites onto porous surfaces and dries hard. Also, the fact that you need water to remove it, is a huge inconvenience and potentially damaging to the blade if it gets on the side of the blade and it's unsealed. RC or Table tennis WBG just require being rubbed off with no water or solvent. Also, I would think that if applied to a sponge, it would seep into the sponge itself and when attempting to remove the glue from the sponge it would destroy it. And doesn't the sponge become harder with dried school glue? RC comes off nicely, sometimes in one piece. Also, with RC there is usually no need to put more glue on the rubber if re-applying it to another blade (just apply to the blade itself). So, to you guys that use school glue, how well does it work for taking the glue off the sponge, and/or re-gluing a previously glued rubber? |
|
| Author: | tommyngo [ 30 Jan 2019, 11:10 ] |
| Post subject: | Re: elmer's glue? |
[quote="Japsican"] If you just speculate on water-based Elmer glue , then you are in for a big surprise !! I just removed 2 rubbers ( Yinghe/ Gallaxy Mercury II , using Elmer's clear school glue) from a sealed blade . They came off the blade right away and I could easily peel the glue from the sponge off completely as a thin membrance without any problem . As for the Elmer RC I used before, I have had a hard time removing the RC glue from the sponge ( i.e. rubbing the RC off with bare fingers !! ) . |
|
| Author: | haggisv [ 30 Jan 2019, 12:27 ] |
| Post subject: | Re: elmer's glue? |
tommyngo wrote: They came off the blade right away and I could easily peel the glue from the sponge off completely as a thin membrance without any problem. Was it soft and rubbery, or a hard layer? |
|
| Author: | iskandar taib [ 30 Jan 2019, 13:11 ] |
| Post subject: | Re: elmer's glue? |
The washable school glue might indeed behave differently than the old Elmer's White Glue. If you apply the old Elmer's Glue to a piece of wood and allow it to soak in an dry it will NEVER come off, since it's meant for gluing pieces of wood together. The Washable School Glue might behave differently, but I'm not going to try it. It's not available everywhere here, like it would be in the US. Iskandar |
|
| Author: | tommyngo [ 31 Jan 2019, 12:45 ] |
| Post subject: | Re: elmer's glue? |
haggisv wrote: tommyngo wrote: They came off the blade right away and I could easily peel the glue from the sponge off completely as a thin membrance without any problem. Was it soft and rubbery, or a hard layer? It feels like a very thin , soft wax paper ... BTW, I am gluing another 2 Chinese rubbers on an Andro Kanter All+ blade for a friend now . The blade weigh 60. grams . After 3 layers of Urethane varnish, it weghs 62. grams . I just finished gluing the red rubbber on . It is being pressed down under a few dictionaries for a few hours before trimming and ready for the black rubber . The Elmer's clear school glue is definitely qute slow-drying .... 
|
|
| Author: | iskandar taib [ 31 Jan 2019, 21:40 ] |
| Post subject: | Re: elmer's glue? |
Describe how you use it. Do you apply it to both blade and rubber and allow it to dry before pressing together (like a contact cement) or are you applying the rubber while the glue is still wet? I don't see how THAT would work.. no where for the water to evaporate. Iskandar |
|
| Author: | tommyngo [ 01 Feb 2019, 11:41 ] |
| Post subject: | Re: elmer's glue? |
[quote="iskandar taib"] You need to spread the glue uniformly thin on both the rubber foam & the blade by using a rectangular piece of thin plastic (i.e. a discarded credit card ...) . Let it dry out for 5 minutes ( i.e. becoming dull & tacky) , then press the rubber onto the blade the usual way . You can use a wooden rod ( 1 " diameter ) to roll on the rubber to squeeze out the entrapped air between the rubber & the blade. Finally, press down the rubber by putting a few heavy books on top ( about 10. lbs is o.K.) for at least 4 hours then trim the rubber with a sharp scissor. Repeat the procedure with the other rubber . Notes: _To keep the rubber from sliding out of position when you put the books on top, you can first tape the rubber to the other face of the blade then put the books . (See Pic_01 & Pic_02) _To speed up the drying process, you can also use an electric fan (See Pic_03)  Pic_01  Pic_02  Pic_03 |
|
| Page 1 of 2 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|