OOAK Table Tennis Forum


A truly International Table Tennis Community for both Defensive and Offensive styles!
OOAK Forum Links About OOAK Table Tennis Forum OOAK Forum Memory
It is currently 28 Mar 2024, 17:56


Don't want to see any advertising? Become a member and login, and you'll never see an ad again!



All times are UTC + 9:30 hours




Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: 11 Jan 2014, 23:32 
Online
Dark Knight
Dark Knight
User avatar

Joined: 13 Dec 2006, 12:34
Posts: 33337
Location: Adelaide, AU
Has thanked: 2741 times
Been thanked: 1548 times
Blade: Trinity Carbon
FH: Victas VS > 401
BH: Dr N Troublemaker OX

Introduction:
We've recently had a few discussion about Soulspin, the German custom blade maker that completely customise the handle to suit your hand. You can read more about Soulspin here: http://www.soulspin.tt/en/soulspin.html

Some of our members have had some very good experiences with the company, so in order to find out a little more about them, as well as giving them some well-deserved exposure, I asked them for an Interview, to which they kindly agreed! :rock: :rock: :rock:

SOULSPIN: In our factory, each product is custom made- something special.Even in the manufacture of veneers, we differ from conventional production methods: we cut our veneers from natural wood. With this innovation, we are able to obtain valuable sawn veneers with properties that far outshine the previous standard.

The further processing in the preparation of our high-quality plywood is done with technical expertise and modern methods, where we exploit the natural features of the various woods, and work with these to get the best possible results from the natural product in terms of its play characteristics.

Our ergonomic three-dimensional handle shapes are created using the latest CNC technology.Your table tennis wood is subjected to painstaking quality control throughout, from the careful selection of the raw wood to the completion of the final product.We use only the highest quality materials, and combine advanced technology with careful craftsmanship to respond to your requirements with a top quality product.


Below are the answers to all our questions, click on the pictures to zoom in for more details.

I'd like to thank the team from Soulspin, particularly Anna, for the great details in the answers to our questions! :clap: :clap: :clap:


The Interview:

BLADES

haggisv:1. Do you think having a comfortable handle for the blade improves you game?
Yes, we are convinced that your game can be improved be the right handle.There are a lot of good reasons, but we just want to point out a few of them.
First of all it simply makes you feel much more comfortable if you have a handle that perfectly fits your hand. Some players have to deal with pain caused by sores or pressure points what can distract your concentration. Moreover it can improve the speed of your play, especially for players who tend to turn their blade a lot. Especially the asymmetrical handle designs (e.g. G3/G4 like in Basalt6 or K2) let the handle automatically "slip into the right position" while turning, because they are shaped like the inner of a hand. This makes turning a lot faster - most players who often hit the edge of the blade can reduce these problems because they are a lot faster now. Some players simply feel more safe with a handle that does not slide out of the hand. There are a lot more good reasons depending on the individual situation of a player like large hand, long fingers etc.


haggisv:2. How important is the balance of a blade (e.g. top heavy). Since rubber add considerably weight to a bat, how important is it to get rubbers of the right weight, to give the bat an overall good balance?
Balancing a blade is a matter of taste. Some players prefer a top-heavy blade because they like to play fast topspins ( see J.O. Waldner). Others prefer the opposite because they want their blade to feel lighter.
This is the reason why we give you the possibility to choose the material for your handle. This is not only for optical reasons but also for balancing your blade. E.g. if your favorite rubber is pretty heavy and your blade feels too top-heavy you can balance your blade by choosing a material that is a little more heavy. For example a handle made of Wenge (No.1 in the configuration tool) is a little more heavy then a handle made out of Kiri (No.4 in the configuration tool) Looking at the standard handle G1 this makes a difference of ca. 6g. Additionally you can play around combining thin and thick designs what gives you even more influence on the balance of your blade.


haggisv:3. How hard is it to get batches of wood that are always consistent, and of the same weight and characteristics? How do you handle variations in wood properties?


Good suppliers are not easy to find. Luckily our boss works with wood since 40 years and he knows where to get good quality from. We only buy high quality wood and we check every batch. We spent a lot of time visiting wood-suppliers all over Europe to find the best ones. For our spruce-wood for example it took us a lot of time for research and traveling to different suppliers, but now we are very happy to have the very best spruce quality and it's definitely worth it.
As we saw every single veneer by hand we can have a look on every piece and sort out pieces of lower quality.
But we should not forget that wood is a natural product and that no tree is like the other. We choose every veneer by hand and we try to combine two pieces that fit each other perfectly relating to the weight and the natural grain of the wood.


Baal:4. Can you tell us if Soulspin will be introducing any more composite blades in the future. The Basalt was an excellent blade, but I would like to have something more along the lines of a Butterfly Viscaria, only with the perfect Soulspin handle.


Yes, we are going to add some more composite blades to shop within the next time. We can process materials like Zylon, Carbon-Aramid-Meshes etc. If you have any wishes just let us know. We can also build a composite blade for you right now, just tell us what you need.


timeshift:5. By looking on your website at different blades, I can say that every blade is build with passion . how does Soulspin develop a new model of blade ? how do you test and and reach the conclusion that your " newest blade " will perform with the maximum level of speed and control , while retaining it's superb aspect and quality ?


Besides SOULSPIN our boss Michael works for a chinese table tennis manufacturer since around 20 years. They develop and produce blades for all big brands like Butterfly, Nittaku, Stiga, Donic, Yasaka, Tibhar, Andro, TSP, Victas etc. As a matter of fact he has a lot of knowledge and experience in this business and he knows many of the Top 20 players. That means after having an idea for a new blade he does the first tests on his own. Afterwards he hands them out for review to different top players.


timeshift:6. can we expect in the future to get the shop and the shop configerator in English any time soon ?

Yes, we hope so ;-) Our configuration tool is " a very complex miracle" constructed by some tec-genius ;-) The development was very nerve-wracking as it is completely hand-made - that means providing an English version is not just translating the whole thing. But this is definitely on our To-Do list and we will try to offer at least a German/English version as soon as possible.


timeshift:
7. What top players have you worked with ? can you share to us some names ?
Sorry, we are not allowed to give you any names because all the top players have their contracts with other tt-brands. But as I said in No.4 Michael knows many top players, especially from Germany, China, Japan and Russia.



timeshift:

8. How is Soulspin encouraging the newer generation of table tennis players ? have you had the chance to support a local table tennis event in order to raise the local awareness regarding table tennis ?
We support some local events and teams by sponsoring prices for small tournaments. Some months ago we supported a very popular event here in our home region. Have you heard of the world championships in 4er-Tisch (4 tables)? If not have a look at http://4er-tisch.de/ This is an initiative from some guys from a local table tennis club who worked hard for setting up this great event. The next WC will take place in France and perhaps we are going to sponsor the prices again.
We also helped two boys, in another way;
First is Frederik, our first "trainee" at SOULSPIN. German kids have to do an internship in school when they are about 14/15 years old. Frederik asked us if it's possible to come to our workshop to learn how to build a blade. He stayed here for one week and made his own blade during this time and of course he is very proud of it now ;-)
Second is Tom-Henry. We met his father at the World Team Cup in Dortmund and he asked us if it's possible to build a special blade for his son Tom-Henry who has no fingers besides his thumb. He plays in the A-team but he has a lot of problems finding a blade he can hold good enough. Therefore we made a very special blade for him what fits his special hand. You can read the story here on our Facebook page. Unfortunately only in german again, but maybe Google translator can help.
https://de-de.facebook.com/media/set/?s ... 815&type=1


timeshift:9. I have only heard about Soulspin recently , mainly because the market is packed with big table tennis competitors, like Butterfly, Stiga, and even big German companies like Donic, Tibhar, Andro. how do you manage to stay competitive ?


SOULSPIN will stay competitive by developing and producing blades that no one of the other brands does have. As we said before Michael develops new technologies also for other brands he is always one step ahead. We have a lot of ideas and a lot of passion for table tennis. Our future goal is to expand our configuration tool to give the players even more possibilities to choose from to make their blade even more individual. We think building very unique blades of very high quality will save us a place in the market besides the big brands.


timeshift:10. Are you making blades from special/exotic materials ( rare type of woods , expensive composite materials like kevlar and others ) for special edition blades ?
At the moment we are not making any special edition blades, this is still too early. As I said in No.4+9 we are planning to expand the materials you can choose from. We are going to offer different kinds of composite materials but no exotic or rare types of wood. Sustainability is very important for us therefore we refuse to use rare types of wood.


haggisv:
11. Are most of your blades already made, and when customers order a specific handle, you make the handle and add this to the blade?

No, we produce every blade when it is ordered. The basic work is done before. When we start to saw veneers in the morning we do not only saw 2 pieces but enough for the production of this day. The blanks for the handles are also prepared before as it takes a long drying period before you can work with them. When an order is placed we choose and glue the veneers and put them into a press over night. In the meantime we prepare the handles and produce them in our CNC-mill. After bringing all parts together every blade gets it's unique serial number by a laser and is shipped to the customer.

Soulspin Handle Production:
Image

Image

Image

Image


haggisv:12. How much of the manufacturing is done by hand? How long does a typical blade take to make?
Building a blade is a combination of manual work and high technologies like CNC milling. As I said before every single veneer is made by hand. We start with a raw piece of wood and cut it down to veneers slice by slice. The veneers are chosen and grinded by hand before we glue them together which is also done by hand. After pressing the blanks the blade is cut out by a CNC mill. The blanks for the handles are also made and glued by hand, only the cutting is done by the CNC mill. Some people criticize that we use CNC technology because they say a blade must be completely made by hand. In our eyes CNC is a great technology, it's extremely precise and we want to get the best result that is possible. We can manufacture our handles to within a hundredth of a millimetre - this reproducable precision can not be achieved by hand. Besides many people forget that constructing a handle at the computer also is a lot of handwork / brain work, as we all do this by ourselves.
The next steps like gluing, grinding and polishing again is made by hand. Let's say 70% manual work, 30% made with the help of machines. Including the time a blade needs for drying etc. the complete production process takes around 40 hours.


manofan:13. Are you planning to release any Defensive Blades in future?
Yes we are going to offer a defensive blade very soon. The development of this blade is already finished, the only problem is adding it to the configuration tool ( see No.6) ;-)


haggisv:14. Do you offer a custom design service, where players can specify the design they like?


Yes, that is one of our big plans for the future. We want players to choose everything on their own. As I said above it is hard to build a platform for such an individual configuration.
BUT we already build specific blades for individual players. A lot of players ask if we can change the thickness of single veneers and of course we can do so. It makes no difference for us if we cut a veneer in 0,8mm or in 1mm. If you have any special wishes just send us an email at [email protected] . We can build everything you want. One of our customers has now ordered blade No. 7 because he loves to try out different veneer combinations the effects on his game.


RUBBERS

Spartan62:1. I'm interested in your rubber P12
. Is it designed to be a direct Tenergy competitor? - if so which one - T05? Or more like a Tensor? - if so which one is closest?

Yes, the P12 is a direct Tenergy competitor and can not be compared with a Tensor. It's pretty close to Tenergy 05 concerning spin, hardness and speed and it's at least a little more inexpensive. We know it is more expensive than other rubbers but we only use high quality materials and we glue every single rubber here by hand - that is the simple reason for the price level.
If you want to try it you can order a test rubber in our shop [url]http://www.soulspin.tt/nc/de/shop.html?tt_products[cat]=8[/url]
(sorry, still German. send us an email if you need help)


Spartan62:2. Will there be a choice of sponge thickness and hardness? Some of us like to play with soft sponge
Yes, we are already testing different kind of sponge thicknesses and we want to offer the possibility to choose in the future. As we glue every rubber by hand we can combine different materials on customers demands, that's no problem. Give us some more time and we will offer you a huge variety of individual rubbers;-)


Spartan62:
3. On the SS website, it says the overall (sponge + topsheet) hardnesss is 52
degrees. Won't that vary depending on the sponge thickness? (if we have a choice).

This is hard for us to explain in English. Your feeling does say that a thick sponge is softer than an thin sponge. But in fact the sponge material itself has one hardness no matter how thick it is. Therefore we say that our rubber has 52° hardness no matter if it is 1,8mm or 2,0mm. It is a matter of feeling.
A 10cm concrete layer is as hard a 1m concrete layer. You need more power to break it, but the hardness in fact does not differ. It's the same with the sponge material. I hope you understand what we mean.


Spartan62:
4. Any testing feedback so far?

We did some personal tests and we are convinced by the results. But we still need some more time to establish that feature.


abdulmuhsee:5. I've noticed that your rubber - P12 - is dual-branded under Nittaku. Is this just to avoid ITTF fees, or are you planning to come out with a set of rubbers entirely under your own brand name?
We are very happy that such a well-known brand as Nittaku works together with a very small team like us. We wanted to produce a high quality rubber and for that we needed the best materials. Japanese topsheets are very well-known for their high quality. Without such a strong partner like Nittaku we would have no chance to produce a rubber of such quality. Project12 is the first product of this great cooperation and we hope that some more will follow over the years. A rubber branded entirely under SOULSPIN is not yet planned.


haggisv:6. Are you planning any new rubbers in future?
Yes we are planning to bring out some new rubbers together with Nittaku soon. Or better said we are planning a make-over of some existing rubbers and give them some new features. Besides we are going to produce another version of Project12 to make it more affordable for the players. Please give us a little more time.


OTHER TOPICS

haggisv:1. Are you planning to have any distributors outside Germany?

Yes, of course we want to work with distributors outside Germany to bring our blades closer to the people. The problem is that our system is very extensive because of the wide range of possibilities to chose from. That means we need distributors who are very well informed about our products and who can guide the players to find the best blade. This is a very time-consuming process as we don't want to work together "with any distributor". As a first step we are going to supply some selected people in different countries with our test-boxes and blades. This will make the access to our test-material a lot easier for players outside Germany since shipping is very expensive for them now. We would love to make it cheaper for you but unfortunately it is that expensive :-(
Additionally we want to start sending test-boxes around the world which can be shipped from player to player without shipping it back to Germany every time. Right now we are preparing the boxes.


haggisv:
2. Have you ever checked out OOAK Forum? If so, what do you think of it?
Yes we do check the OOAK Forum regularly. In your forum we found the first posts about SOULSPIN in April 2012 right after our start at the World Team Cup in Dortmund. This was very exciting and made us very happy! It's great so see how our baby goes around the world and what people think about it. I think forums are a good way to communicate with players and to find out more about there wishes and opinions. At the moment we are not registered users but only "silent readers" but perhaps we should register one day to get in touch with more players ( This could be a good way to organize the travel of our test-boxes around the world )

© 2014 OOAK Forum

~~~~~~~~~~~~~~End of Interview~~~~~~~~~~

Some Specials blades by Soulspin:
Image

Image

Image

_________________
OOAK Table Tennis Shop | Re-Impact Blades | Butterfly Table Tennis bats
Setup1: Re-Impact Smart, Viper OX, Victas VS 401 Setup2: Re-Impact Barath, Dtecs OX, TSP Triple Spin Chop 1.0mm Setup3: Re-Impact Dark Knight, Hellfire OX, 999 Turbo
Recent Articles: Butterfly Tenergy Alternatives | Tenergy Rubbers Compared | Re-Impact User Guide


Top
 Profile  
 


Don't want to see this advertisement? Become a member and login, and you'll never see an ad again!

PostPosted: 12 Jan 2014, 05:16 
Offline
Hard Justice
User avatar

Joined: 11 May 2010, 15:07
Posts: 779
Has thanked: 2 times
Been thanked: 23 times
This really makes me want to look into a Soulspin blade, especially after its been clarified that they can do their custom blades outside of the configerator tool. I'd really have to look for an excuse to need a new blade.

To me, and I would imagine any potential non-German customer, one of the main problems is the German-only shop tool. The design and innovation is already there, so it's really just a few technical kinks away from expanding.

Also, do I smell a possible Australian Soulspin distribution setup here? :-)

_________________
Custom Blade 'Hard Justice' w/ Yasaka Cobalt a
Tatco Hornet w/ ATP Leland Era


Top
 Profile  
 
PostPosted: 13 Jan 2014, 07:54 
Online
Dark Knight
Dark Knight
User avatar

Joined: 13 Dec 2006, 12:34
Posts: 33337
Location: Adelaide, AU
Has thanked: 2741 times
Been thanked: 1548 times
Blade: Trinity Carbon
FH: Victas VS > 401
BH: Dr N Troublemaker OX
Yes I agree... adding English language can have great potential for them. Judging by the English of the Interview, they're very capable of this! :up:

They make everything look so good! Doesn't that case with the different handle options look awesome! :o :clap:

abdulmuhsee wrote:
Also, do I smell a possible Australian Soulspin distribution setup here? :-)

LOL, yes I wish! :lol: :lol: :lol:

_________________
OOAK Table Tennis Shop | Re-Impact Blades | Butterfly Table Tennis bats
Setup1: Re-Impact Smart, Viper OX, Victas VS 401 Setup2: Re-Impact Barath, Dtecs OX, TSP Triple Spin Chop 1.0mm Setup3: Re-Impact Dark Knight, Hellfire OX, 999 Turbo
Recent Articles: Butterfly Tenergy Alternatives | Tenergy Rubbers Compared | Re-Impact User Guide


Top
 Profile  
 
PostPosted: 13 Jan 2014, 19:10 
Offline
Modern Chiseler.
Modern Chiseler.
User avatar

Joined: 05 Oct 2007, 06:49
Posts: 11148
Location: USA
Has thanked: 572 times
Been thanked: 578 times
Blade: WRM Gokushu2
FH: S&T Secret Flow 1mm
BH: S&T Monkey ox
Which Soulspin blade is recommended for blocking at the table with long pips?

_________________



The MNNB Blog has had some pretty amazing stuff lately. Just click this text to check it out.
| My OOAK Interview
Table Tennis Video Links: itTV | laola1.tv | ttbl | fftt | Challenger Series | mnnb-tv

My whole set-up costs less than a sheet of Butterfly Dignics


Top
 Profile  
 
PostPosted: 15 Jan 2014, 09:16 
Offline
Reverse Psychologist
Reverse Psychologist
User avatar

Joined: 17 Nov 2011, 02:09
Posts: 1488
Location: Belgium
Has thanked: 216 times
Been thanked: 283 times
Blade: Victas Matsushita Off
FH: Tibhar EL-s 1.9
BH: Victas Curl P1V 1.0
Great interview with nice pictures of beautiful blades. Good to see people caring about the art and comfort of a blade. Didn't hear from Soulspin until now though... Keep up the good work & good luck for the future :up:

_________________
Exclusive OOAK-Interview with Joo Saehyuk | Masato Shiono | Panagiotis Gionis


Top
 Profile  
 
PostPosted: 25 Jan 2014, 00:24 
Offline
Senior member

Joined: 23 Apr 2013, 01:41
Posts: 102
Has thanked: 0 time
Been thanked: 4 times
Good stuff but my question below wasn't aswered as I intended
--------
Spartan62:
3. On the SS website, it says the overall (sponge + topsheet) hardnesss is 52
degrees. Won't that vary depending on the sponge thickness? (if we have a choice).

--------
This is hard for us to explain in English. Your feeling does say that a thick sponge is softer than an thin sponge. But in fact the sponge material itself has one hardness no matter how thick it is. Therefore we say that our rubber has 52° hardness no matter if it is 1,8mm or 2,0mm. It is a matter of feeling.
A 10cm concrete layer is as hard a 1m concrete layer. You need more power to break it, but the hardness in fact does not differ. It's the same with the sponge material. I hope you understand what we mean.
--------

I understand that the sponge hardness doesn't change with thickness but the overall hardnesss (sponge + topsheet) might change becuase the thickness of the topsheet is fixed.

If we have a top sheet thickness 2mm with hardness 60 and a sponge thicknesss 2mm with hardness 40, we can see that might give an overall hardness (sponge + topsheet) of about 50. If the sponge thickness is instead only 1mm then it has less influence on the the overall hardness, so it will be higher, 53 maybe.

It is for that reason I asked the question and that is why I'm unsure if the overall hardness is a good measure... on its own.

I hope this is well understood :-)


Top
 Profile  
 
PostPosted: 25 Jan 2014, 08:39 
Online
Dark Knight
Dark Knight
User avatar

Joined: 13 Dec 2006, 12:34
Posts: 33337
Location: Adelaide, AU
Has thanked: 2741 times
Been thanked: 1548 times
Blade: Trinity Carbon
FH: Victas VS > 401
BH: Dr N Troublemaker OX
Yes you have a point. The answer seems to indicate that the number mainly refers to the sponge.

Usually the topsheet is significantly harder than the sponge, so the measurement is mainly that of the sponge, even if the two are measured together.

_________________
OOAK Table Tennis Shop | Re-Impact Blades | Butterfly Table Tennis bats
Setup1: Re-Impact Smart, Viper OX, Victas VS 401 Setup2: Re-Impact Barath, Dtecs OX, TSP Triple Spin Chop 1.0mm Setup3: Re-Impact Dark Knight, Hellfire OX, 999 Turbo
Recent Articles: Butterfly Tenergy Alternatives | Tenergy Rubbers Compared | Re-Impact User Guide


Top
 Profile  
 
PostPosted: 04 Feb 2014, 20:37 
Online
Dark Knight
Dark Knight
User avatar

Joined: 13 Dec 2006, 12:34
Posts: 33337
Location: Adelaide, AU
Has thanked: 2741 times
Been thanked: 1548 times
Blade: Trinity Carbon
FH: Victas VS > 401
BH: Dr N Troublemaker OX
Cool video of how they add the serial numbers to the blade:


_________________
OOAK Table Tennis Shop | Re-Impact Blades | Butterfly Table Tennis bats
Setup1: Re-Impact Smart, Viper OX, Victas VS 401 Setup2: Re-Impact Barath, Dtecs OX, TSP Triple Spin Chop 1.0mm Setup3: Re-Impact Dark Knight, Hellfire OX, 999 Turbo
Recent Articles: Butterfly Tenergy Alternatives | Tenergy Rubbers Compared | Re-Impact User Guide


Top
 Profile  
 
PostPosted: 07 Feb 2014, 16:43 
Online
Dark Knight
Dark Knight
User avatar

Joined: 13 Dec 2006, 12:34
Posts: 33337
Location: Adelaide, AU
Has thanked: 2741 times
Been thanked: 1548 times
Blade: Trinity Carbon
FH: Victas VS > 401
BH: Dr N Troublemaker OX
Soulpsin: Has there be any reviews of your p12 rubber so far?

_________________
OOAK Table Tennis Shop | Re-Impact Blades | Butterfly Table Tennis bats
Setup1: Re-Impact Smart, Viper OX, Victas VS 401 Setup2: Re-Impact Barath, Dtecs OX, TSP Triple Spin Chop 1.0mm Setup3: Re-Impact Dark Knight, Hellfire OX, 999 Turbo
Recent Articles: Butterfly Tenergy Alternatives | Tenergy Rubbers Compared | Re-Impact User Guide


Top
 Profile  
 
PostPosted: 23 Feb 2014, 08:30 
Offline
Manufacturer: SOULSPIN

Joined: 23 Feb 2014, 08:11
Posts: 6
Has thanked: 0 time
Been thanked: 1 time
Yes, we post all reviews we receive about Project 12 or our blades on our website and on Facebook. Unfortunately this part of our website is only available in german yet :-( We are very sorry that we can not provide 100% of soulspin.tt in english yet, but we are working on it.

For those who understand german you can have a look at our review page here:
http://www.soulspin.tt/de/technologie/p ... ichte.html

English speaking players can try the automatic translation by google - I think this is not that bad.
Please have a look here: http://translate.google.com/translate?s ... ichte.html


If you have any questions please feel free to ask at any time!

_________________
If you have any questions about SOULSPIN please feel free to ask at any time.


Top
 Profile  
 
PostPosted: 23 Feb 2014, 15:52 
Online
Dark Knight
Dark Knight
User avatar

Joined: 13 Dec 2006, 12:34
Posts: 33337
Location: Adelaide, AU
Has thanked: 2741 times
Been thanked: 1548 times
Blade: Trinity Carbon
FH: Victas VS > 401
BH: Dr N Troublemaker OX
THank you soulspin!

If anyone can help translate some of the major points from the review, that would be very helpful! :up:

_________________
OOAK Table Tennis Shop | Re-Impact Blades | Butterfly Table Tennis bats
Setup1: Re-Impact Smart, Viper OX, Victas VS 401 Setup2: Re-Impact Barath, Dtecs OX, TSP Triple Spin Chop 1.0mm Setup3: Re-Impact Dark Knight, Hellfire OX, 999 Turbo
Recent Articles: Butterfly Tenergy Alternatives | Tenergy Rubbers Compared | Re-Impact User Guide


Top
 Profile  
 
PostPosted: 14 May 2014, 00:03 
Offline
Manufacturer: SOULSPIN

Joined: 23 Feb 2014, 08:11
Posts: 6
Has thanked: 0 time
Been thanked: 1 time
Sorry Spartan, we did not realize that this topic was continued - please excuse the late (very late) reply. Now we finally understood what you mean!
Yes, purely mathematical you are right. Also if the hardness of the material itself is not affected by the thickness the relation between sponge and topsheet is not exactly the same - that's right.

BUT ;) in our opinion the overall hardness is still the most exact measuring method. Many rubber manufacturers measure the hardness of the sponge only and add the topsheet afterwards. This does not lead to exact measuring results. You have to keep in mind that the glue etc. also influences the hardness a lot.
Therefore we think it's more precise and more meaningful for the players (and a lot of top players agree with us) to measure the complete rubber (including glue) even your objection is right. The difference in measuring between 1.8 and 2.0 is only minimal, the feeling makes the difference.

Perhaps we can show our measurement in a video as soon as we find the time for it ;-)


Spartan62 wrote:
Good stuff but my question below wasn't aswered as I intended
--------
Spartan62:
3. On the SS website, it says the overall (sponge + topsheet) hardnesss is 52
degrees. Won't that vary depending on the sponge thickness? (if we have a choice).

--------
This is hard for us to explain in English. Your feeling does say that a thick sponge is softer than an thin sponge. But in fact the sponge material itself has one hardness no matter how thick it is. Therefore we say that our rubber has 52° hardness no matter if it is 1,8mm or 2,0mm. It is a matter of feeling.
A 10cm concrete layer is as hard a 1m concrete layer. You need more power to break it, but the hardness in fact does not differ. It's the same with the sponge material. I hope you understand what we mean.
--------

I understand that the sponge hardness doesn't change with thickness but the overall hardnesss (sponge + topsheet) might change becuase the thickness of the topsheet is fixed.

If we have a top sheet thickness 2mm with hardness 60 and a sponge thicknesss 2mm with hardness 40, we can see that might give an overall hardness (sponge + topsheet) of about 50. If the sponge thickness is instead only 1mm then it has less influence on the the overall hardness, so it will be higher, 53 maybe.

It is for that reason I asked the question and that is why I'm unsure if the overall hardness is a good measure... on its own.

I hope this is well understood :-)

_________________
If you have any questions about SOULSPIN please feel free to ask at any time.


Top
 Profile  
 
PostPosted: 30 Jul 2014, 00:10 
Offline
Manufacturer: SOULSPIN

Joined: 23 Feb 2014, 08:11
Posts: 6
Has thanked: 0 time
Been thanked: 1 time
Hi to all english speaking players!

We finally managed to finish the english version of our website - that means our shop as well as our configuration tool are available in English from now on. We hope this will make everything a little easier for you.

Best wishes from the SOULSPIN-Team

P.S. If you find any mistakes please let us know :)

_________________
If you have any questions about SOULSPIN please feel free to ask at any time.


Top
 Profile  
 
PostPosted: 30 Jul 2014, 08:15 
Online
Dark Knight
Dark Knight
User avatar

Joined: 13 Dec 2006, 12:34
Posts: 33337
Location: Adelaide, AU
Has thanked: 2741 times
Been thanked: 1548 times
Blade: Trinity Carbon
FH: Victas VS > 401
BH: Dr N Troublemaker OX
That's a great effort! I had a quick look, and it reads really well, well done! :up:

_________________
OOAK Table Tennis Shop | Re-Impact Blades | Butterfly Table Tennis bats
Setup1: Re-Impact Smart, Viper OX, Victas VS 401 Setup2: Re-Impact Barath, Dtecs OX, TSP Triple Spin Chop 1.0mm Setup3: Re-Impact Dark Knight, Hellfire OX, 999 Turbo
Recent Articles: Butterfly Tenergy Alternatives | Tenergy Rubbers Compared | Re-Impact User Guide


Top
 Profile  
 
PostPosted: 06 Jan 2016, 18:58 
Offline
Manufacturer: SOULSPIN

Joined: 23 Feb 2014, 08:11
Posts: 6
Has thanked: 0 time
Been thanked: 1 time
Hi everybody,

sorry for being offline for such a long time - SOULSPIN was upside down for some private reasons but now we are back again and we will try to reply sooner in the future ;-)

We have some goods news about products and upcoming projects…

A few days ago we finished our first defensive blade called ROOTS Defensive Control 7. Many players asked for a defensive blade, now it's finally available. You can have a look about the characteristics here http://www.soulspin.tt/en/technology/roots-hoelzer/roots-7-defensive-control-defensive-blade.html. It's extremely soft because of thick FICHTE veneers, we are sure defensive players will like it.

It's not only a new blade (e.g. wood type) but also a brand new blade size called 'DEF' . It's 156x162mm and even larger than our size 'L'. That means you can choose from 4 different sizes now. Please don't be confused - at the time moment you can not yet choose the new size and blade in the configuration tool as the implementation is a little tricky - if you want to order it, just let us know by email.
Yesterday we have uploaded a printable off all 4 blade sizes to our media center. You can download it, print at 100% and you will get a 1:1 drawing of our blade sizes.
http://www.soulspin.tt/uploads/media/soulspin-blattgroessen-bladesize-printable_01.pdf

Additionally we have send out the registration for 2 new rubbers to the ITTF. Now we have to wait until the approval process is finished. If everything goes right the rubbers will be published on the ITTF list on April 1st. One of them will be very special and we are wondering what you will think about them ;-)

Furthermore we have worked on a kind of special edition blade which is very beautiful and has some special features. It will be published as soon as we have finished all the descriptions, photos etc.

And we have found a very nice new composite we will use for new blades as soon as we receive it. We hope it will not take too much time but we will keep you updated.

For those you understand german: We were visited by the 'Tischtennis Helden' some days ago. They own a Youtube channel about tabletennis and filmed some videos about SOULSPIN. The first one, an interview with Michael Schneider, was published before Christmas.Some more videos will follow through the year. You can have a look at their channel here. https://youtu.be/99KIhCYCWao

These are all news for now - we promise to post updates more often in the future ;-)

Best wishes from the SOULSPIN-Team

_________________
If you have any questions about SOULSPIN please feel free to ask at any time.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next



All times are UTC + 9:30 hours


Who is online

Users browsing this forum: No registered users and 25 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Copyright 2018 OOAK Table Tennis Forum. The information on this site cannot be reused without written permission.

Powered by phpBB® Forum Software © phpBB Group