OOAK Table Tennis Forum

Nittaku Screw One OX.

Has anybody played with these pips?

Reading the vendor specification it seems to be a good pips, slow and grippy with good inversion and deception, has anybody tried it?

_________________
Blade:Joo Se Hyuk
FH:729 Focus II
BH:TSP P1-R 1.0

hmm I know hookshot used the screwsoft for a while, but I hadn't heard of the screw one before. Perhaps they're similiar?

_________________
Grab my FREE Peak Performance Cheat Sheet and learn 7 unusual ways to improve your game.

Personalized Online Performance Coaching for Table Tennis now available!

May be! Screw Soft came with sponge and Screw One without, but I don't know if the topsheet is the same.

_________________
Blade:Joo Se Hyuk
FH:729 Focus II
BH:TSP P1-R 1.0

Hi pix,
I used Screw Soft but it is faster than I like. Now I am using Dr Evil or 755 OX on the backside.
Today I setup a blade with Screw One, (I took the sponge off of a Screw Soft).
I will hit with it in the morning and tell you what I think. I have been tempted to do this for a while now. You gave me the nudge to do it.
The Dr Evil OX is very slow with tremendous control. It works well for returning serves. It is Easy to chop away from the table. It is easy to block with and keep them short. It gives spin reversal against heavy spin. It is amazingly fast if you flat hit with it.
The 755 OX is a little faster. It has a little less control. (still good) It does everything Dr Evil does but has some other options. A lift stroke is one. It is eaiser to change spin with different strokes than Dr Evil. Evil could be compared to an Anti, kind of one dimentional.
All of these are on Fast blades.

_________________
Shakehand, left handed.
Blade, Yinhe, W-1
Forhand, H-3 National
Backhand, Sriver FX Max

Opppps,
I had to use a thinner to get the sponge off and now after putting the top on the blade, it is bubbling and curling. Looks like I will have to order a Screw one. Might take me a while but I am working on it.

_________________
Shakehand, left handed.
Blade, Yinhe, W-1
Forhand, H-3 National
Backhand, Sriver FX Max

Nittaku Screw One (OX) is exceptionally good for chops and occasional hitting. One can execute most of the shots which are possible with Dr N's rubbers. This rubber appears to create spin reversal with deception. Chops can be kept low with a considerable amount of spin. Also, returned balls can be floated.

It is very easy to use and seems to be better than Classic Boomerang. This is just an impression as I haven't given enough time to play with them in a competitive atmosphere.

I think vender's description of its playing characteristics is precise and true. The quality of the pips is superior to all available long pimpled rubbers at present. It is easier to remove this rubber from the blade as its base is fairly sturdy. So, one can experiment with this rubber on different blades to find the best balde for this rubber.

One can stay close to the table to control the game. I think this rubber is the closest to Dr N's Super Block playing characteristics. As Nittaku Screw One (OX) is grippy, so you can create a lot of spin.

Nittaku Screw Soft is faster than this rubber; and hard to play close to the table with it.

Hi Hookshot,

To arrange any long pimple rubber, just put glue on the blade. Let it dry for a while then just roll the pimple rubber (or any rubber) on it from the handle side. Press it hard for couple of minutes and then cut it with a scissors.

This will allow you to remove the rubber later on, if needed to be replaced with another rubber.

Hi GR,
That was not the problem. I had some Screw Soft and removed the sponge. It would not come off easy so I used a thinner. After I glued it to the blade, the thinner must have kept working on it and bubbled it.
For most OX, I use a glue sheet and have no problems.
I will just order a Screw One to try.

_________________
Shakehand, left handed.
Blade, Yinhe, W-1
Forhand, H-3 National
Backhand, Sriver FX Max

Quality better than all LPs out there?? that's a BIG statement!

Closest to SB?? The Screw is quite a grippy rubber and far from frictionless, so I find it hard to believe it can be even close...

_________________
OOAK Table Tennis Shop | Re-Impact Blades | Butterfly Table Tennis bats
Setup1: Re-Impact Smart, Viper OX, Victas VS 401 Setup2: Re-Impact Barath, Dtecs OX, TSP Triple Spin Chop 1.0mm Setup3: Re-Impact Dark Knight, Hellfire OX, 999 Turbo
Recent Articles: Butterfly Tenergy Alternatives | Tenergy Rubbers Compared | Re-Impact User Guide

Thank you GR! Sound very intresting!

Agree with you, the quality of this rubber is very high, better than most pips around.

I have this rubber on my hand but I can't try it until 1 months.
The only test I made is sticked on a TSP balsa 3.5 and bouncing a ball from 40cm seems slower than Bamboo, P1-R OX, 955 or any other grippy long pimples I have used. May be this is due to its tacky surface?

_________________
Blade:Joo Se Hyuk
FH:729 Focus II
BH:TSP P1-R 1.0

Yes, be good if GR would explain what he means by this, because friction and frictionless characteristics are very different by their very nature.

I think Tat might disagree and protest that his Long A is the best quality LP pips out! LOL

_________________
I'm always in the dark, but the Dark sheds lights upon everything!! Beauty is only pimple deep! Beauty is in the eye of the pipholder!
S/U 1: Blade: Bty Gergely . FH Black Andro Rasant 2.1 . BH Red Tibhar Grass Dtecs
S/U 2: Blade: Bty Gergely . FH Black Hexer+ 2.1 . BH Red GD Talon
S/U 3: Blade: Bty Gergely . No rubbers...thinking of adding Red Dtecs and Black Rasant
Aussie Table Tennis Shop / Aussie Table Tennis Facebook Page / Equipment Review Index / Read my Reb Report Blog: click here.

Yes, ReBorn, you read my mind. I was going to say something, but Haggisv beat me to it, so....

Like I said on the other post, this Long A had a beating continuously from November to now and only lost ONE pip. After gluing back with super-glue, it looks like new again. So far so good, let's see how long it will last.

Regarding the statement that Nittaku Screw One is superior to all long pimples rubbers, may be I should have worded it slightly in a different way that the quality of Nittaku Screw One is almost better than most of the rubbers available in the market.

Regarding the statement that Nittaku Screw One's playing characteristics are approximating to SB:
. One can stay close to the table as it is not very fast rubber.
. Considerable amount backspin can be generated.
. Drop shots can be executed.
. Returned balls can be kept low.
. Some balls have unpredictable bounce
. Opponent's chopped balls can be lifted
. Provides an excellent control.
. Some of the returned balls appear to be wobbling.

May be spin reversal characteristic of SB is lacking.

Took another sheet of Screw Soft and used the steam iron method to remove the sponge today.
I put it on a very fast blade and it is hard to tell apart from 755 OX. It works just like GR says. Not as slow as Dr Evil OX but close. Easy to block or chop with. Also worked on returning chop serves with a little lift stroke.

_________________
Shakehand, left handed.
Blade, Yinhe, W-1
Forhand, H-3 National
Backhand, Sriver FX Max

Hi hookkshot, thank you for your try.
I think Screw One may be a little slower than your Screw Soft without sponge, due to its glue sheet and a textil reinforcement under the topsheet probably not present on the Screw Soft.

_________________
Blade:Joo Se Hyuk
FH:729 Focus II
BH:TSP P1-R 1.0