OOAK Table Tennis Forum

I've never gone through the trouble of repairing blades so I have no experience doing it. I'm wondering what type of wood filler people use to fill in gaps on a damaged blade?

_________________
OOAK Table Tennis Shop | Re-Impact Blades | Butterfly Table Tennis bats
Setup1: Re-Impact Smart, Viper OX, Victas VS 401 Setup2: Re-Impact Barath, Dtecs OX, TSP Triple Spin Chop 1.0mm Setup3: Re-Impact Dark Knight, Hellfire OX, 999 Turbo
Recent Articles: Butterfly Tenergy Alternatives | Tenergy Rubbers Compared | Re-Impact User Guide

I have used various products, and the best so far is of the Plastic Padding brand, "Kjemisk tre". Haven't found the English version of the product, but should be labeled "Chemical wood" or simply "Wood filler". When you mix in the hardening agent, it is workable for 10-15 minutes. Let it settle for an hour or so after initial hardening before you start shaping and finishing.

I hear that Henkel is rebranding some of their product lines, and I believe the Plastic Padding brand is split to brands Teroson (auto repair) and Loctite (everything else). May be different in your part of the world...

I use Elmer's carpenters wood filler, then seal it with a fast drying polyurethane minwax.

It works good plays good.

_________________
Panda Drive / 4H Xiom Sigma Pro 2 2.0 / BH Xiom Omega IV Elite Max / Play right-handed
XVT balsa carbon 10mm / 4H Xiom Sigma Pro 2 2.0 / BH Globe 979 Long Pips OX / Play Left-handed shakehand
Stiga Def Wood / 4H Xiom Sigma Pro 2 2.0 / BH GD CC LP OX .. Play Left-handed
Cpen SOS Wood / 4H 729 802-40 2.0 / BH GD Talon use righthanded shakehand grip
HARDBAT / Shakehand Hock 3 ply / Friendship Dr Evil OX .. Play Right-handed

Thanks guys! I'll see if our hardware store has one of those products.

_________________
OOAK Table Tennis Shop | Re-Impact Blades | Butterfly Table Tennis bats
Setup1: Re-Impact Smart, Viper OX, Victas VS 401 Setup2: Re-Impact Barath, Dtecs OX, TSP Triple Spin Chop 1.0mm Setup3: Re-Impact Dark Knight, Hellfire OX, 999 Turbo
Recent Articles: Butterfly Tenergy Alternatives | Tenergy Rubbers Compared | Re-Impact User Guide

I suspect a number of fillers would work. You need something that 1) has really good adhesion to wood (you don't want it to pull loose when you remove a rubber sheet), 2) is reasonably hard, and 3) can be made flat after it hardens with very light sanding using a sanding block. Try it on scrap wood first.

Iskandar

I used a Ronseal one and it has stayed put through intensive ej ing

_________________
Modified Yin-He T2 Tenergy 05 fx 1.9/388d ox